LED Wall Lamp Range for OEM and Project Buyers
SOFT LIGHT’s led wall lamp range covers 19 models, each with a specification table covering Power, Light source, Luminous flux, Protection, Colors, Battery and Color temperature. Compare per model, then send application, finish and OEM and private-label requirements through the inquiry form for a model check.
Request a quote for these models
- Models on this page
- 19 models
- OEM samples, your finish and packaging
- 2–3 weeks
- Typical production after order and deposit
- 30–45 days
Comparing the LED Wall Lamp Models and Their Fields
This led wall lamp category runs to 19 models, each with its own specification table below. The tables share the same columns: Power, Light source, Luminous flux, Protection, Colors, Battery and Color temperature, with the battery and color temperature entries filled in where a model carries them. Comparing those fields model by model builds the shortlist.
Send the application, the finish you want and any OEM and private-label requirement through the inquiry form, and SOFT LIGHT will check which models fit the brief. The tables are not a ranking; position, finish and the surrounding scheme weigh as much as the figures for a buyer.
LED wall lamps: models and specifications
| Model | Power | Light source | Luminous flux | Color temperature | Battery | Protection | Colors |
|---|---|---|---|---|---|---|---|
| B635 | 1.5W | LED/1Wx1PC/1700K | 100LM | — | — | IP20 | Gray |
| D-1816A-B | 2W | LED/1Wx1PC | 150LM | 3000K | 18650/3.7V/2200mAhx2PCS | IP20 | Titan/Black/White |
| D-1816B-B | 2W | LED/1Wx1PC | 150LM | 3000K | 18650/3.7V/2200mAhx2PCS | IP20 | Titan/Black/White |
| D-1859A | 6W | Lumen:500LM | 500LM | — | — | IP20 | Titan/Black/White |
| D-1859B | 6W | Lumen:500LM | 500LM | — | — | IP20 | Titan/Black/White |
| D-1891A | 4.2W | LED module:4W/3000K | 278 LM | — | — | IP20 | White glass |
| D-1891B | 2.2W | LED module:2W/3000K | 40 LM | — | — | IP20 | Brown glass |
| D-1891C | 2.2W | LED module:2W/3000K | 40 LM | — | — | IP20 | Green glass |
| D-1891D | 2.2W | LED module:2W/3000K | 92 LM | — | — | IP20 | White Acrylic |
| D-1891E | 4.2W | LED module:4W/3000K | 250 LM | — | — | IP20 | Yellow Acrylic |
| D-1891F | 4.2W | LED module:4W/3000K | 141 LM | — | — | IP20 | Green Acrylic |
| D-1892A | 13W | LED/63PCSx0.2W/3000K | 534LM | — | — | IP20 | Black |
| D-1892B | 30W | LED/145PCSx0.21W/3000K | 1793LM | — | — | IP20 | Black |
| D-1892C | 12W | LED/42PCSx0.21W/3000K | 574LM | — | — | IP20 | Black |
| D-1892D | 11W | LED/0.2Wx50PCS/3000K | 662LM | — | — | IP20 | Gray |
| D-1892E | 6.3W | LED/30PCSx0.21W/3000K | 360LM | — | — | IP20 | Gold |
| D-1892F | 10W | LED/2PCSx5W/3000K | 1000LM | — | — | IP44 | Black/White |
| D-1892G | 6W | LED/1PCx6W/3000K | 600LM | — | — | IP20 | Black/White |
| D-1892H | 38W | LED/80PCSx0.2W/3000K | 2582LM | — | — | IP20 | Black |
Wall lamp model notes
- D-1892H
- The D-1892H LED Wall Lamp is for hotel corridors and bedrooms and is factory direct and OEM.
Sconce Light and Wall Sconce Light Selection
Sconce light and wall sconce light name the same wall-mounted fittings this page lists, and each model is described by its own specification table. Review Power, Light source, Luminous flux, Protection, Colors, Battery and Color temperature where a model records them, and treat the tables as the reference for a shortlist. The D-1859A and D-1891C appear there as LED wall lamps.
- Mounting position and the fixing surface
- Finish against surrounding metalwork and joinery
- Protection where the position is damp or outdoor-facing
- Color temperature where the model records an entry
Suitability is checked per model against the mounting location and the finish requirement. Send the position, quantity, destination market and finish through the inquiry form and SOFT LIGHT will run a model check. Where a finish sits outside the listed options, OEM finish, branding and packaging are confirmed per model with the quotation.
LED Wall Lights, Wall Lights and Wall Light Fixture Selection
The page lists 19 wall light models with specifications and the finish options recorded in the Colors column. Importers and project buyers compare Power, Light source, Luminous flux, Protection, Colors, Battery and Color temperature per model, because the fields differ between entries. The D-1892H is listed for hotel corridors and bedrooms as factory direct and OEM, which gives a reference point where that application matches your brief.
Wall light fixture is another term for the wall-mounted models on this page, and the same 19 per-model tables apply. Where a requirement goes beyond the table, send the details through the inquiry form for a model check, whether that is a fixing arrangement, a power supply question or a finish outside the options.
Wall Lights Living Room Selection for Trade Buyers
For living-room ranges, shortlist from the finishes recorded in the Colors column and from the per-model tables rather than from style descriptions. Room proportions, the finish of adjacent metalwork and joinery, and the color temperature entry where a model carries one should guide the choice. Fittings flanking a chimney breast, set beside a reading position or carried along a long wall are common arrangements, and each changes which model fits.
OEM finish, branding and packaging are confirmed per model with the quotation, so a retail range can be assembled around the entries that suit the scheme. Decorative lighting and table lamps often sit in the same assortment.
Modern Wall Lights for OEM and Project Programmes
Requests for modern wall lights are answered through finish options and specification fields. Shortlist from the finishes named in the Colors column, compare the per-model tables for Power, Light source, Luminous flux, Protection, Battery and Color temperature, then confirm OEM finish and packaging per model with the quotation. Send design intent through the inquiry form for a model check, and see OEM/ODM for the wider programme.
For programmes that repeat, framework orders with scheduled repeats are available for hotel rollouts and retail chains. Mass production typically takes 30–45 days after order confirmation and deposit, depending on model, quantity and finish. Pricing and MOQ are confirmed per model and finish with the quotation.
Samples, lead time and ordering
- What to send
- Model numbers, quantity, finish, destination market and your branding and packaging requirements.
- Samples
- Catalogue samples dispatch in 5–10 days; OEM samples with your finish and packaging take 2–3 weeks.
- Production
- Mass production typically takes 30–45 days after order confirmation and deposit, depending on model, quantity and finish.
- MOQ and packing
- MOQ is confirmed per model and finish with the quotation. Standard export packing uses a white box; a retail colour box with your branding is available under OEM.
- Shipping and payment
- Orders ship via South China ports (Shenzhen / Guangzhou), and payment terms are agreed per order.
Request a quotation
Send the model numbers, quantity, finish and branding you need; we will confirm MOQ, price and lead time.
Or write to sales@lampmanufacturers.com